|
|
i-Snail-VC: Current
Transducer with 0-5VDC Output
The i-Snail-VC offers an inexpensive method
to monitor any AC electrical load.
This product is ideal as an AC load sensor for Control and Energy Management
applications.
The built-in CT and self powered feature combine to make an easy to install,
robust and accurate solution.
The i-Snail-VC is a self
powered AC current transducer that provides a 0-5V dc analog signal
proportional to the AC current flowing through the device wire window (sine
wave RMS calibrated). This product is functionally identical to the
i-Snail-V, but features a wire mount enclosure
for smaller size and lower cost.
The i-Snail-VC is ideal for load monitoring without the need
for an external power supply. Factory calibrated, fixed ranges ensure
superior accuracy and eliminate configuration and adjustments in the field,
saving time and avoiding confusion. Color coded labels allow for easy
identification of full scale range.
The 14.5mm (0.570”) wire window accommodates a conductor up to AWG #2.
Multiple turns of the primary wire may be used to alter the input range.
Output voltage is clamped at 6.5V, and the unit delivers a linear output up
to 120% overload (6V).
 |
 |
 |
| Accurate, Linear Output |
0-5VDC Output Proportional
to Input Range |
Mounting Hardware for
Flexible Surface Mounting |
| Power: |
Self powered by line current |
| CT Wire
Window: |
13.7mm
(0.54") |
| Ranges: |
Fixed 10A,
25A, 50A or 100A (120% overload) |
| Output: |
0-5 VDC,
proportional to RMS input current (sine wave).
Clamped at approx 6.5V
Linear to 120% overload (continuous)
200A overload (temporary) |
| Accuracy: |
Better than
0.5% of full scale
Ripple less than 0.1% of output |
| Enclosure: |
L=2.5",
W=1.6", H=0.9" (including terminal block)
UL94V-0 ABS Plastic
|
| Dielectric
Withstand: |
2.5kVRMS for
one minute |
Datasheet |
PDF |
Wiring Diagram |
PDF |
copyright (c) Elkor Technologies Inc.
|
