|
Products Ordering |
||||||||||||||||
|
ET24V - 24 V Power Distribution Board
Application: The ET24V provides cost effective way to distribute excitation power for DDC equipment (typically 24 VAC). The board simplifies wiring and saves installation time. It provides a convenient way to power eight independent circuits with one control transformer. The board may be used to power DDC panels, field devices and/or other Elkor interfaces. Product Description: The ET24V provides eight fused power circuit for excitation of control equipment that may be supplied by one control transformer. The board speeds-up wiring and provides a convenient mean to manage control power distribution. The input current passes via a 0.1 R power resistor that acts as a shunt for load measurements with a standard AC Volt-meter applied to the Load Test jumper. Each circuit is protected by a 2 A fast acting fuse. The fuse status is indicated by green LED. Disconnect jumper in each output allows for fast circuit separation and/or testing. The board is equipped with extra connector to add more ET24V boards in to one larger power transformer if more than 8 circuits are required. The board is equipped with angular connectors for fast and easy wiring. It mounts in a molded snap-track 2.75 " (70 mm) wide, provided with each board. Specifications:
Information:
copyright (c) Elkor Technologies Inc.
|